• By Champion Inspect

Quick Tip #33 – Squeak, Squeak, Squeak in the Hardwood Floor

Updated: Apr 11, 2019


Flooring of all types has the potential for squeaks. Floor framing dries and shrinks, and squeaks occur as fasteners become loose, allowing movement in the subfloor and framing. Hardwood floors are known for this quality as they dry during the winter.

For a quick fix, try sprinkling a little talcum powder between the offending hardwood boards. This may temporarily quiet the squeak as the talc lubricates the rubbing surfaces.

For a better quick fix, try Counter Snap. This screw fastening system secures loose hardwood floorboards and stops squeaks. You drive the slotted screw through a special bracket into the hardwood and subfloor. (For dense woods, you will need to drill a small pilot hole.) Once the screw tightens the loose board, you break off the screw just below the finished wood surface.

You will be left with a very small hole which you can patch with wood putty or colored filler – or just ignore.


#Flooring #Framing #Noise #QuickTips #Seasonal #Wood

9 views

Providing Utah Home Inspections in Greater Salt Lake Area including; Home Inspections, Commercial Inspection, energy audits,

lead-based paint testing, mold inspection, radon testing. Utah Home Inspectors Serving Salt Lake City, Sandy, Herriman, South Jordan,

West Jordan, Tooele, Draper, Bluffdale, Riverton, Eagle Mountain, Provo, Bountiful, Clearfield, Roy, West Haven & Ogden.